This t-shirt is comfortable, soft, lightweight, and form-fitting. It's an ideal staple piece for any wardrobe!
• 100% combed ring-spun cotton
• Heather Grey is 90% cotton, 10% polyester
• Fabric weight: 4.3 oz/yd² (145.8 g/m²)
• 32 singles
• Pre-shrunk
• This item is printed on demand with your custom design.
Size guide
|
XS |
S |
M |
L |
XL |
2XL |
3XL |
Body Length (inches) |
27 |
28 |
29 |
30 |
31 |
32 |
33 |
Body Width (inches) |
17 ½ |
19 |
20 ½ |
22 |
24 |
26 |
28 |
Care Instructions
Machine wash cold, inside-out, gentle cycle with mild detergent and similar colors. Use non-chlorine bleach, only when necessary. No fabric softeners.
Tumble dry low, or hang-dry for longest life.
Cool iron inside-out if necessary. Do not iron decoration.
Do not dry clean
Print File Guidelines
Front & Back Print = 12″ × 16″
Must-follow guidelines
- Submit files in PNG or JPEG format with at least 150 DPI
We recommend using PNG for designs with a transparent background. For other designs, we advise preparing files in JPEG instead.
- Create files in sRGB color profile
To ensure your design looks the same when printed as it does on screen, make sure you create your print file in sRGB color profile.
- Remove print file template guidelines
If you use our downloadable templates, delete the guide layers before saving your files. If you don't delete them, they'll show up on the print.
Tips for best results
- Avoid semi-transparent designs
Semi-transparent graphics (or elements with lowered opacity) don't translate well in DTG printing. We advise using solid colors, or simulating semi-transparency by halftoning.
- Create designs with the necessary DPI
Simply typing in a new resolution value into the file won't result in a higher resolution print. If your graphic's resolution is too low, the best solution is to recreate it.
- Use transparency to your advantage
Black ink will appear gray on black garments because of the white underbase used during printing. Leave these areas fully transparent when designing for black garments.
- Avoid borders when designing sleeve prints
We advise against using graphics with perfect borders for sleeve printing, since the print can warp slightly when the sleeve is being pulled off the pallet.